1、陶瓷生產機械轉運平臺歐盟CE知識分享指令

MD機械指令：2006/42/EC

2、陶瓷生產機械轉運平臺歐盟CE知識分享標準：

EN ISO 12100：2010 機械安全 - 用于設計的一般準則-風險評估及風險降低

EN 60204-1：2018 機械安全.機械電氣設備.第1部分：一般要求

EN 13367:2005+A1:2008/AC:2009 Ceramic machines - Safety - Transfer platforms and cars陶瓷機械.安全.轉移平臺和汽車

3、EN 13367:2005+A1:2008/AC:2009適用范圍：

1.1 This European Standard applies for the design, installation and commissioning of transfer platforms and cars and ancillary devices for the process related transport of ceramic material on rails. The rails, which are considered to be horizontal and the movement of vehicles in equipment and machinery connected with the process related transport such as kilns, dryers, collector scaffolds, machinery for loading and unloading are also covered.

1.2 This European Standard deals with all significant hazards, hazardous situations and events relevant to transfer platforms and cars, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Noise is not a significant hazard. This document deals with the preventive measures to minimise these hazards which can arise during commissioning, the operation and maintenance.

1.3 This European Standard is not applicable to:

1.3.1 Kilns and dryers (see EN 746-1:1997), machinery for setting and dehacking of heavy clay and refractory, products and machinery for loading and unloading of fine clay tiles;

1.3.2 Retrial, packaging and storage of finished products;

1.3.3 Transport of cars with not rail mounted equipment e.g., with driverless trucks (see EN 1525:1997);

1.3.4 Transfer platforms and cars which are driven by human power.

1.4 This European Standard is not applicable to transfer platforms and cars and ancillary devices which are manufactured before the date of publication of this European Standard by CEN.

1.1本歐洲標準適用于軌道上陶瓷材料工藝相關運輸的轉運平臺、車廂和輔助設備的設計、安裝和調試。軌道被認為是水平的，與工藝相關運輸相關的設備和機械（如窯爐、烘干機、收集器腳手架、裝卸機械）中的車輛運動也包括在內。

1.2本歐洲標準涉及與轉移平臺和車輛相關的所有重大危險、危險情況和事件，當它們按預期使用并在制造商預見的條件下使用時（見第4條）。噪音不是重大危險。本文件涉及預防措施，以Zui大限度地減少調試、運行和維護過程中可能出現的這些危險。

1.3本歐洲標準不適用于：

1.3.1窯爐和干燥機（見EN 746-1:1997），重粘土和耐火材料的固化和脫包機械，精細粘土磚的陶瓷生產機械轉運平臺和裝卸機械；

1.3.2成品的復驗、包裝和儲存；

1.3.3使用非軌道安裝設備的汽車運輸，例如使用無人駕駛卡車（見EN 1525:1997）；

1.3.4由人力驅動的轉運平臺和車輛。

1.4本歐洲標準不適用于CEN發布本歐洲標準之前制造的轉移平臺、車輛和輔助設備。